黄慎江,陈宇.基于构件拆除法的不规则预压装配式框架连续倒塌分析[J].安徽建筑大学学报,2022,30(): |
基于构件拆除法的不规则预压装配式框架连续倒塌分析 |
Progressive Collapse Analysis of Irregular Plane Preloading Frame Structure Based on Column Removal Method |
投稿时间:2021-09-26 修订日期:2021-11-23 |
DOI: |
中文关键词: 不规则框架 构件拆除法 连续性倒塌 预压装配式结构 ABAQUS仿真分析 |
英文关键词: irregular frame continuous collapse dismantling component method prefabricated structure with preloading ABAQUS simulation analysis |
基金项目:国家自然科学青年科学基金(JZ2016GJQN0921);预压装配式预应力混凝土框架抗连续倒塌分析方法及数值模拟(JZ2015AKZR0029) |
|
摘要点击次数: 1371 |
全文下载次数: 439 |
中文摘要: |
文章通过ABAQUS有限元模拟软件建立了一L形平面不规则预压装配式PC框架,设置多种不同工况,研究了拆除各个位置承重柱后该框架剩余结构的抗连续倒塌机理。研究表明:预压装配式结构可提高结构整体的最大抗力;预应力钢筋的配置可提高结构的抗连续倒塌能力,并在悬链线阶段提高效果更好;柱失效位置对结构抗连续倒塌有着重大的影响,转角柱的结构抗连续倒塌性能介于内柱与长边中柱之间,其破坏位置越低,破坏时间越早,破坏范围越大。 |
英文摘要: |
The article uses ABAQUS finite element simulation software to establish an L-shaped plane irregularly pre-compressed assembled PC frame. Set a variety of different working conditions, the mechanism of resisting continuous collapse of the remaining structure of the frame after the dismantling of the load-bearing columns at various positions is studied. The analysis results surface: the pre-compressed assembly structure can improve the maximum resistance of the structure; the configuration of prestressed steel bars can improve the continuous collapse resistance of the structure, and the effect is better in the catenary stage; The failure position of the column has a significant impact on the continuous collapse resistance of the structure. The continuous collapse resistance of the corner column is between the inner column and the long-side center column. The lower the failure position, the earlier the failure time and the larger the failure range. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |