基于三矢量的PWM整流器改进模型预测直接功率控制方法

李善寿; 朱世璠; 谢陈磊

文章摘要

李善寿,朱世璠,谢陈磊.基于三矢量的PWM整流器改进模型预测直接功率控制方法[J].安徽建筑大学学报,2024,32(5):46-54

基于三矢量的PWM整流器改进模型预测直接功率控制方法

Improved Model Predictive Direct Power Control Method for PWM Rectifiers Based on Three Vectors

DOI：

中文关键词: T型三电平 PWM整流器模型预测直接功率控制最优电压矢量序列共模电压抑制

英文关键词: T-type three level PWM rectifier model predictive direct power control optimal voltage vector sequence common modevoltage suppression

基金项目:国家重点研发计划项目（2023YFC3807704）

作者	单位
李善寿	安徽建筑大学智能建筑与建筑节能安徽省重点实验室，安徽合肥 230022
朱世璠	安徽建筑大学智能建筑与建筑节能安徽省重点实验室，安徽合肥 230022
谢陈磊	安徽建筑大学智能建筑与建筑节能安徽省重点实验室，安徽合肥 230022

摘要点击次数: 2266

全文下载次数: 0

中文摘要:

为解决传统模型预测直接功率控制存在的开关频率不恒定、计算量大、共模电压大问题，设计了一种三矢量模型预测直接功率控制方法。该方法通过在单个控制周期内输出三个不同电压矢量，克服了传统方法因连续多个周期输出相同电压矢量造成的开关频率不恒定问题；同时，在两相静止坐标系中，通过优化空间电压矢量图划分方法，采用两个代价函数确定电网电压矢量所在扇区，将算法的遍历次数从 27次降至 10次，克服了传统方法计算量大的问题；此外，通过去除两个冗余零矢量PPP与NNN，将共模电压抑制在Udc/3以内。最后搭建了5 kW实验样机进行实验验证，仿真与实验结果表明，该方法可以有效降低计算量，输出谐波和共模电压抑制效果优于传统方法。

英文摘要:

Conventional model predictive direct power control encounters challenges such as inconsistent switching frequency, highcomputational complexity, and elevated common-mode voltage. In addressing these issues, we have devised a three-vector model forpredicting direct power control. This method, within a single control cycle, generates three distinct voltage vectors, overcoming theinconsistency in switching frequency associated with traditional approaches that output identical voltage vectors over consecutivecycles. Simultaneously, within the two-phase stationary coordinate system, we have employed an optimized spatial voltage vector mappingtechnique. By utilizing two cost functions to ascertain the sector in which the grid voltage vector resides, we have reduced thealgorithm's iteration count from 27 to 10, effectively mitigating the computational complexity prevalent in conventional methods.Furthermore, by eliminating two redundant zero vectors（PPP and NNN）, we have successfully confined the common-mode voltagewithin Udc /3. This step contributes to enhancing system stability and performance. Finally, a 5 kW experimental prototype wasconstructed for comprehensive experimental validation. Simulation and experimental results indicate that our proposed method significantlyreduces computational complexity, and its output harmonic and common-mode voltage characteristics surpass those of traditional methods.

查看全文查看/发表评论下载PDF阅读器

关闭