文章摘要
赵俊,孙奕清,曹绍林,唐伟军.移动光照下液晶弹性体固支梁的动态响应分析[J].安徽建筑大学学报,2024,32(4):44-51
移动光照下液晶弹性体固支梁的动态响应分析
Design and Simulation Analysis of a Power Battery System Based on PHEV
  
DOI:
中文关键词: 液晶弹性体  移动光照  动态响应  模态叠加法  杜哈梅尔积分
英文关键词: liquid crystal elastomer  moving illumination  dynamic response  modal superposition method  Duhamel integral
基金项目:国家自然科学基金项目-面上项目(12172001)
作者单位
赵俊 安徽建筑大学 土木工程学院安徽 合肥 230601 
孙奕清 安徽建筑大学 土木工程学院安徽 合肥 230601 
曹绍林 广州市盛通建设工程质量检测有限公司广东 广州 510075 
唐伟军 广州市盛通建设工程质量检测有限公司广东 广州 510075 
摘要点击次数: 1016
全文下载次数: 0
中文摘要:
      液晶弹性体(LCE)梁在移动光照作用下会产生弯曲动态响应,为此建立 LCE固支梁在移动光照下的动态模型,并推导出动态响应的控制方程。在此基础上,通过模态叠加法和Duhamel积分法获得LCE固支梁在移动光照下动态响应的解析解,并利用Matlab软件对模型进行编程进而分析物理参数对LCE固支梁动态响应的影响。结果表明:当移动光照的速度达到一阶临界速度时,固支梁跨中动态响应的振幅最大。此外,通过改变光照强度、LCE的材料收缩系数和阻尼系数等参数,可以有效调控动态响应。研究成果在软机器人、智能控制和能量转换等领域具有应用价值。
英文摘要:
      Liquid crystal elastomer (LCE) beams produce a bending dynamic response under the moving illumination. The dynamic model of LCE fixed supported beam under moving illumination was established, and the control equation of dynamic response was derived. On this basis, the analytical solution of the dynamic response of LCE fixed supported beam under moving illumination was obtained by modal superposition method and Duhamel integral method, and the dynamic response was programmed by Matlab software to analyze the influence of physical parameters on the dynamic response of LCE fixed supported beam. The result showed that the maximum amplitude of the dynamic response on the mid-span of the fixed supported beam reached the peak only when the velocity of the moving illumination reaches the first-order critical velocity. In addition, the dynamic response can be effectively controlled by the light intensity changes, the shrinkage coefficient and the damping coefficient of LCE material. The results can be applied to the fields including soft robotics, intelligent control and energy conversion.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮