文章摘要
农升伟,罗文结,李保军,郭馨艳,庞忠华,曾灵铠.预应力SCFRP加固损伤箱梁抗弯性能研究[J].安徽建筑大学学报,2024,32():
预应力SCFRP加固损伤箱梁抗弯性能研究
Flexural Behavior of Prestressed SCFRP Reinforced Damaged Box Girders.
投稿时间:2023-12-05  修订日期:2024-04-11
DOI:
中文关键词: 预应力  SCFRP加固  空心箱梁  损伤
英文关键词: prestress  SCFRP reinforced  box girder  damaged
基金项目:国家自然科学基金项目(面上项目)No.12172134; 国家留学基金委资助项目 No. 202206155006
作者单位邮编
农升伟 广西壮族自治区桂西公路发展中心 530001
罗文结* 华南理工大学土木与交通学院 510641
李保军 广西交通科技集团有限公司 
郭馨艳 华南理工大学土木与交通学院 
庞忠华 柳州欧维姆机械股份有限公司 
曾灵铠 华南理工大学土木与交通学院 
摘要点击次数: 22
全文下载次数: 7
中文摘要:
      近几十年来,基础设施的老化和负荷加重加剧了基础设施的劣化现象。据统计,全国近一半出现病害的桥梁为空心混凝土桥。因此,采用合理高效的方法对损伤箱梁进行加固,以确保其在服役期间的安全运行至关重要。本论文选取了7根已退役空心箱梁作为研究对象,首先对这些梁进行了损伤度检测。随后,采用不同预应力度钢丝-碳纤维增强复合材料(SCFRP)和碳纤维复合材料(CFRP)对不同损伤度的空心箱梁进行加固。通过对加固箱梁现场加载试验以及DIC测量,分析了不同预应力度SCFRP以及CFRP(S/CFRP)以及损伤度对加固结构承载力、裂纹以及S/CFRP-混凝土界面性能的影响。研究结果表明,施加预应力的S/CFRP可以有效减缓裂纹的扩展,且预应力度越高,加固后梁的抗弯承载力提升越显著。然而,高预应力度也可能导致S/CFRP-混凝土界面滑移量增加,从而增加界面剥离的风险。
英文摘要:
      In recent decades, the aging of infrastructure and increased loads have exacerbated the deterioration of infrastructure. According to statistics, nearly half of the bridges nationwide that have developed defects are made of hollow box girders. Therefore, it is crucial to reinforce damaged box girders using reasonable and efficient methods to ensure their safe operation during service. This paper selected seven decommissioned hollow box girders as the research objects and first conducted damage detection on these girders. Subsequently, different levels of prestressed steel wire-carbon fiber reinforced polymer (SCFRP) and carbon fiber reinforced polymer (CFRP) were used to reinforce the hollow box girders with varying degrees of damage. Through on-site loading tests and DIC (Digital Image Correlation) measurements of the reinforced girders, the effects of different prestress levels of SCFRP and CFRP (S/CFRP) as well as damage levels on the load-bearing capacity, crack formation, and S/CFRP-concrete interface properties of the reinforced structures were analyzed. The research results indicate that prestressed S/CFRP can effectively retard crack propagation, and the higher the prestress level, the more significant the increase in the bending load capacity of the reinforced girders. However, high prestress levels may also lead to an increase in the slip at the S/CFRP-concrete interface, thereby increasing the risk of interface debonding.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮