| 张安林,郑报文,夏伟.悬臂拼装桥主梁制造线形计算[J].安徽建筑大学学报,2015,23(1):21-24 |
| 悬臂拼装桥主梁制造线形计算 |
| Computation of Fabrication Profile of girders in Cantilever Erection Practice of Bridges |
| |
| DOI：10.11921/j.issn.2095-8382.20150105 |
| 中文关键词: 悬臂拼装 钢箱梁 施工控制 制造线形 |
| 英文关键词: cantilever erection steel box girder construction control fabrication profile |
| 基金项目: |
|
| 摘要点击次数: 8293 |
| 全文下载次数: 0 |
| 中文摘要: |
| 斜拉桥悬臂拼装施工速度快、质量高、适应性强,这种施工方法在国内外已经广泛应用, 从而悬拼结构的施工线形控制问题开始凸现出来.为了使钢梁在安装过程中高质量对接并最终达到成桥线形,需将钢梁按制造线形在胎架上预拼. 以某钢箱梁斜拉桥为工程背景,用有限元分析软件midas建立该桥模型,通过零初始位移法和切线初始位移法分别计算主梁制造线形. 对安装新梁段与相邻旧梁段夹角从几何关系进行了推导证明,并据此给出了计算无应力制造线形的实用公式. |
| 英文摘要: |
| Cable-stayed Bridge with cantilever assembling, which have many advantages including fast construction, high quality and adaptability, has been widely used in the world. Profile control began to stand out in cantilever structure during construction. In order to make the steel beam docking in high quality during the installation process, and eventually reach the design profile, the steel girder need to pre-fight on the tire rack. A Cable-Stayed Bridge of steel box beam, which model was established used finite element analysis software Midas, was taken as engineering background, to elaborate how to calculate fabrication profile of main beam using Zero Initial Displacement Method and Tangent Initial Displacement Method. Angle relationship was derived through the geometric relationships between a new beam which will be installed and the adjacent old beam which has just been fixed, and Practical formula of Stress-free fabrication profile was given accord to the result. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
