文章摘要
王月,周帆.建筑外墙保温饰面板的环温辐照解耦测试方法[J].安徽建筑大学学报,2023,31():
建筑外墙保温饰面板的环温辐照解耦测试方法
Decoupling Test Method of Ambient Temperature and Radiation for Building Exterior Wall Insulation Panels
投稿时间:2022-05-06  修订日期:2022-05-31
DOI:
中文关键词: 结构工程  建筑外墙保温饰面板  解耦测试方法  S域分析  数值模拟
英文关键词: structural engineering  building exterior wall insulation panels  decoupling test method  S-Domain analysis  numerical simulation
基金项目:安徽省自然科学基金资助(2108085QE242)
作者单位E-mail
王月 安徽建筑大学 18813006778@163.com 
周帆* 清华大学合肥公共安全研究院 zhoufan2@mail.ustc.edu.cn 
摘要点击次数: 1308
全文下载次数: 408
中文摘要:
      针对环温和辐照耦合测试工况下的建筑外墙保温饰面板,提出一种解耦测试方法。首先,通过信号处理的方法,对饰面板的温度和应变测量信号作S域分析,找到解耦测试信号和耦合测试信号之间的传递函数。其次,通过建立保温饰面板的传热及热应变有限元计算模型,采用数值模拟验证解耦测试方法的准确性。结果表明,温度和应变的耦合与解耦信号高度吻合,应变耦合与解耦信号在非辐照区域较辐照区域延迟大约10h。
英文摘要:
      Under the coupling test condition of ambient temperature and radiation, a decoupling test method is proposed for building exterior wall insulation panels. First, the signal processing method is used to analyze the temperature and strain measurement signals in S-Domain, and the transfer function between the decoupling test signals and the coupling test signals is found. Next, to verify the accuracy of decoupling test, the finite element model of heat transfer and thermal strain of insulation panels are employed. The results indicate that the temperature and strain coupling signals largely coincide with decoupling signals, and the strain coupling and decoupling signals in the non-irradiation region are delayed about 10 hours than in the irradiation region.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮