| 姚永红.开孔冷弯薄壁型钢柱弹性畸变屈曲分析[J].安徽建筑大学学报,2014,22(6):10-13 |
| 开孔冷弯薄壁型钢柱弹性畸变屈曲分析 |
| Elastic distortional buckling analysis of clod-formed thin-walled steel column with hole |
| |
| DOI：10.11921/j.issn.2095-8382.20140603 |
| 中文关键词: 冷弯薄壁型钢 畸变屈曲 有限元方法 有限条方法 孔洞 |
| 英文关键词: cold-formed thin-walled steel distortional buckling finite element method finite strip method holes |
| 基金项目:住房和城乡建设部科学技术项目(2014-K2-033);安徽省博士后基金(DG152);安徽理工大学青年基金重点项目(12684) |
|
| 摘要点击次数: 7263 |
| 全文下载次数: 0 |
| 中文摘要: |
| 为方便生活辅助设施在墙体中通过，常在低层轻钢住宅结构中采用开孔冷弯薄壁型钢柱作为承重构件形式。近年来，许多学者对冷弯薄壁型钢构件畸变屈曲稳定问题开展了大量的研究工作。目前关于开孔柱构件弹性畸变屈曲应力计算方法是柱构件稳定性能研究亟待解决的关键问题。本文采用有限元方法与有限条方法相结合的手段，提出了基于全截面厚度折减的有限条分析方法及适用于设计规范的弹性畸变屈曲应力计算公式。分析表明：提出的相关计算方法可以用于开孔柱构件弹性畸变屈曲应力的计算。 |
| 英文摘要: |
| Cold-formed thin-walled steel columns are commonly provided with holes as bearing members to accommodate auxiliaty living facilities crossing in the low-rise lightweight steel residence structure. Study on the distortional buckling stability of cold-formed thin-walled steel members have widely been implemented in recent years by some researchers. The elastic distortional buckling stress calculation method for open-hole column is the key issues in stability problem of cold-formed thin-walled steel structural member. The design method of elastic distortional buckling combined with finite strip method and finite element method was proposed, which contained finite strip method based on modifying whole cross-section thickness and calculation formula in this study. It is shown that the proposed methods can be used for design specification. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
