| 翟红侠,杨启安,廖绍锋,荆喆.聚丙烯纤维增强泡沫混凝土性能研究[J].安徽建筑大学学报,2016,24(): |
| 聚丙烯纤维增强泡沫混凝土性能研究 |
| Performance Test of Polypropylene Fiber Reinforced Foam Concrete Research |
| 投稿时间：2015-10-30 修订日期：2016-04-04 |
| DOI： |
| 中文关键词: 聚丙烯纤维泡沫混凝土 力学性能 保温性能 干燥收缩性能 干密度 |
| 英文关键词: Polypropylene Fiber Foamed Concrete Mechanical Property Heat-insulating Property Dry Shrinkage Performance Dry Density |
| 基金项目:安徽省墙改办2014年新型墙材科研项目,项目编号2015FACZ2681。 |
|
| 摘要点击次数: 3492 |
| 全文下载次数: 1309 |
| 中文摘要: |
| 利用体积法计算出不同干密度聚丙烯纤维增强泡沫混凝土的配合比,制备出聚丙烯纤维增强泡沫混凝土。研究不同等级干密度对其力学性能、保温性能和干燥收缩性能的影响,并在良好保温性能、强度与较低干收缩条件下,探讨聚丙烯纤维增强泡沫混凝土的最优干密度。结果表明：干密度等级越高的聚丙烯增强泡沫混凝土力学性能好,干燥收缩值变化较小,但其导热系数较大,保温性能差。具有良好保温性能、强度与较低干收缩聚丙烯纤维增强泡沫混凝土的最优干密度为800-900 Kg/m3。 |
| 英文摘要: |
| Volume method is used to calculate the different dry density of polypropylene fiber reinforced foam concrete mixture ratio and polypropylene fiber reinforced foam concrete is prepared.Studies of the strength of the dry density, the influence of the insulation resistance and drying shrinkage performance, and investigate the optimum dry density of polypropylene fiber reinforced foam concrete under the condition of good thermal insulation performance, strength and low dry shrinkage.Results show that the level of dry density, which the higher of the polypropylene reinforced foam concrete mechanics performance is good and the drying shrinkage value is small, but its larger thermal conductivity, heat preservation performance is poor.There is good thermal insulation performance,strength and low dry shrinkage of polypropylene fiber reinforced foam concrete optimum dry density is 800-900 Kg/m3. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
